Tanaka Works m870

This here is an old relic of shell fed shotguns.

It is functioning, but would rather sell it to someone who is able handed, mainly because this is very old and spare parts are hard to come by.

Parts that have been installed in this:
 - pps steel slide block (activates the shell elevator that feeds new shells)
 - pps mag tube fixed bar (has homemade screws and some loctice 542, doesnt wobble)
 - cam 870 trigger disconnecter
 - g&p surefire pump (has been modified to fit, no wobble, no stress on shelltube)
 - pps steel hammer and sear
 - velcro tape on the side

Also included:
 - 15x pps 3bb shells *NEW* (12x of these work fine, 3x are letting out gas)
 - 12x tanaka works shells (11x of these work somewhat fine, one of these does not hold gas)
 - molle shell carrier for 18x shells (two 6x slides can be separated and attached to the side of the gun)
 - shell carrier for 6x shells (diy from a stock holder)
 - pps shell catcher
 - original pump
 -  shell refill tools
 - pps steel forks

Things worth mentioning: 
 - The trigger wall is unpleasant, will have to squeeze all the way to the back or rather quick to release the trigger.
 - Plastic shell breech has been glued to the body with loctite 542.
 - When fixing the shell breech, one hole drilled through top of the body.
 - The pump can be swapped by turning the shelltube counterclockwise and removing the tube guide, then either use pump removal tool or backend of a hammer to unscrew the pumps tightener.

Shipping done by ems or courier service within Europe.
Shipping is included in the price.

If you have any questions I am able to give some answers.